HS-1 updates & downloads
Presets, VST plugins, drivers, manuals and approved Windows updates for your Octave HS-1. Log in with the serial number on the back of your unit.
Full system restore (Windows image)
Restores your HS-1 to its factory state. You need two USB sticks.
- Download the Windows image and copy it to USB stick 1.
- Download the Acronis boot media and extract it to USB stick 2 (formatted as FAT32).
- Plug in both sticks, start the HS-1 from USB stick 2 and restore the image from USB stick 1.
Important: USB stick 2 (the boot stick) must be formatted as FAT32, otherwise the HS-1 can't start from it. In Windows: right-click the stick in File Explorer, choose Format, set File system to FAT32 and click Start. Formatting erases everything on the stick. Use a stick of 32 GB or smaller for the boot stick, because Windows only offers FAT32 for sticks up to 32 GB.
USB stick 1 (the image) needs at least 32 GB and must be formatted as exFAT or NTFS, not FAT32, because the image file is larger than 4 GB.
USB stick 1 (the image) needs at least 32 GB and must be formatted as exFAT or NTFS, not FAT32, because the image file is larger than 4 GB.
Make sure the whole image has downloaded before you restore. If the download stops halfway, the file is incomplete and broken. Restoring from a broken image can fail and may leave your HS-1 unable to start. Check that your browser shows the download as finished (not "Failed" or "Interrupted"), then right-click the file, choose Properties and check that Size is exactly the full size shown on the download button. If it's smaller, resume or restart the download and don't restore until it matches.
Download links work for 60 minutes. If one stops working, refresh this page.

